| ABS復合塑膠材料物性表 |
| 測試項目 | 測試方法 | 單位 | 501-G10 | 501-G15 | 501-G30 |
| Properties | Test Condition | Unit |
| 密度(比重) | D792 | g/cm3 | 1.11 | 1.15 | 1.27 |
| Specific Gravity |
| 成型收縮率 | - | % | 0.4 | 0.3 | 0.2 |
| Mold Shrinkage |
| @Flow(3.2mm) |
| 抗張強度 | D638 | kg/cm2 | 800 | 860 | 1000 |
| Tensile Strength +23˚C | Mpa | 80 | 86 | 100 |
| 斷裂延伸率 | D638 | % | 5 | 4 | 3 |
| Elongation at Break +23˚C |
| 抗曲模數 | D790 | kg/cm2 | 36000 | 44000 | 71000 |
| Flexural Modulus +23˚C | Mpa | 3600 | 4400 | 7100 |
| 熱變形溫度 | D648 | ˚C | 93 | 93 | 94 |
| Heat Deflection |
| Temperature 18.6kg/cm2 |
| 艾氏沖擊強度 IZOD Impact Strength, Notched(3.2mm) | + 23˚C | D256 | kg.cm/cm | 7 | 7 | 6 |
| lb.ft/in | 1.2 | 1.2 | 1.1 |
| - 20˚C | D256 | kg.cm/cm | - | - | - |
| lb.ft/in | - | - | - |
| 燃燒性 (1.6mm) | UL-94 | - | HB | HB | HB |
| Flammability UL-94 |
| 灰份 | - | % | 10 | 15 | 30 |
| ASH |
| 備 注 | 10%GF強化 | 15%GF強化 | 30%GF強化 |
|
|
|
|
|
|
|
| 本表所列物性數值僅供參考非保証值 |
| All figures entered in this table are typical figures and therefore no guarantee |
|
|
|
|
|
|
|
| TAIRILAC 台湾化学纤维公司 |
| 规 格 | 比重 | 收缩率 % | M I | 冲击强度 | 特 性 |
| AG15E1 | 1.05 | 0.4~0.7 | 1.9 | 14 | 一般耐冲规格 |
| AG15A1 | 1.05 | 0.4~0.7 | 1.7 | 20 | 中耐冲击规格 |
| AG1000 | 1.03 | 0.4~0.7 | 0.4 | 40 | 高耐冲击规格 |
| AXT040 | 1.05 | 0.4~0.7 | 3.0 | 10 | 高耐热规格 HDT:111˚C |
| ANC100 | 1.21 | 0.4~0.7 | 3.2 | 18 | 防火级,1/10"防火 5V |
| AT5500 | 1.07 | 0.4~0.7 | 2.1 | 15 | 透明级 |
00+86-769-81868215
